Pillar Lighting
A split block of light for lawns, paths and garden beds
This garden light is a solid square block with natural-looking splits running through it, so warm light escapes through the cracks and fans out across the ground around it. The rust-coloured, wood-like surface gives it the character of a weathered timber stake, bringing a sculptural, modern feel to lawns, paths, garden beds and courtyards.
The block is made from metal with a water-transfer printed finish that imitates the look of wood, so it keeps the durability and weather resistance of metal. An integrated warm white 3000K LED of about 10W lights it from within. It is hardwired to 110–240V mains, rated IP65 and works with a standard push switch (not included). Two sizes are offered: 30 × 30 × 30 cm and 30 × 30 × 60 cm (11.8″ × 11.8″ × 11.8″ and 11.8″ × 11.8″ × 23.6″).
01Split DesignLight escapes through natural cracks
02Rust FinishMetal with a wood-look printed surface
03IP65 RatedBuilt for lawns and garden beds
04Two Heights30 cm or 60 cm tall
Design & Material
The look of timber, the strength of metal
Water-Transfer Finish
The surface is printed and sprayed to mimic a rust-toned wooden stake. It is metal throughout, not wood, so it will not rot or split further outdoors.
Light Through the Cracks
The splits in the block act as light channels, casting long fans of warm light across grass, paving or gravel at night.
Dimensions
Two heights
Both sizes share a 30 × 30 cm footprint. The 30 cm suits low planting and paths; the 60 cm stands above garden beds and lawn edges.
| Variant |
Imperial |
Metric |
| 30 cm Tall |
L 11.8″ × W 11.8″ × H 11.8″ |
L 30 cm × W 30 cm × H 30 cm |
| 60 cm Tall |
L 11.8″ × W 11.8″ × H 23.6″ |
L 30 cm × W 30 cm × H 60 cm |
Technical Details
Product Specifications
Product TypeGarden pillar light
MaterialMetal
FinishRust colour, water-transfer printed
Light SourceIntegrated LED, included
PowerAbout 10W
Colour Temperature3000K warm white
Voltage110–240V
InstallationHardwired
SwitchStandard push switch, not included
IP RatingIP65
Warranty2 years
Lighting Character
Fans of warm light
Warm 3000K light escapes through the splits rather than from a single lens, so the block throws dramatic fans of light across the ground. It is atmospheric accent lighting, ideal for defining lawns, path edges and planting at night.
Placement
Where it works best
Set it on firm, level ground where the light fans can fall across open space.
Lawn EdgeDefines the border between lawn and beds.
Garden PathMarks a route with dramatic light.
CourtyardA sculptural object among paving and planting.
Outdoor Performance
IP65 for garden use
The IP65 rating protects the light against dust and water jets from any direction, so it suits lawns, paths, villas and garden beds. Place it on firm ground where water drains away from the base.
Installation
Hardwired garden installation
The light is hardwired to the mains supply. Use outdoor-rated cabling and seal all connections, and fit a suitable push switch, which is not included.
Professional installation recommended. Electrical installation should be completed by a suitably qualified electrician and in accordance with applicable local electrical requirements.
Warranty
Two-Year Warranty
This pillar light is supplied with a 2-year warranty, so you can choose it with confidence for everyday use.
Care
Keep the Surfaces Clean
Switch off before cleaning. Wipe the surface with a soft, damp cloth and clear away soil, leaves and grass clippings. Avoid abrasive pads and harsh chemical cleaners, which can wear the printed finish.
Dimension Reference
Split cube size reference