Edge Rectangular Outdoor Wall Lamp
A Slim Resin Wall Light Defined by Clean Architectural Proportion
The Edge Outdoor Wall Lamp is shaped around a simple rectangular silhouette, bringing a restrained architectural presence to contemporary exterior spaces. Its minimal form places emphasis on proportion rather than ornament, allowing the fixture to sit naturally alongside modern facades, pathways, patios and entrance architecture.
Constructed from weather-resistant resin, Edge is available in two sizes — 15.7″ / 40 cm and 23.6″ / 60 cm — and uses a single LED light source to create warm illumination. An IP65 waterproof rating supports dependable exterior use across entrances, porches and other outdoor wall applications.
01 Minimal Rectangular Form A clean linear silhouette designed for contemporary exteriors.
02 Weather-Resistant Resin Resin construction designed to withstand changing outdoor conditions.
03 IP65 Waterproof Designed for dependable year-round exterior performance.
04 Warm LED Light Soft illumination creates a more inviting exterior atmosphere.
Design & Material
Minimal geometry shaped for modern outdoor architecture
Slim Rectangular Silhouette
Edge avoids the decorative framework of a traditional lantern in favour of a simple elongated form. This gives the wall lamp a quieter architectural character suited to modern and minimalist exterior schemes.
Resin Construction
Both the fixture and shade are constructed from resin, creating a cohesive material expression while supporting the weather-resistant performance required for exterior installations.
Dimensions
Two architectural sizes for different wall proportions
Edge is available in two listed sizes, allowing the same minimalist rectangular form to be selected at a more compact or more substantial scale.
Compact 15.7″ / 40 cm
The smaller configuration provides a more restrained presence for tighter exterior wall areas and compact architectural settings.
Larger Scale 23.6″ / 60 cm
The larger configuration increases the visual length of the rectangular form for entrances, broader wall sections and more prominent exterior applications.
Small 15.7″ / 40 cm
Large 23.6″ / 60 cm
The supplied specification lists the two fixture sizes as 15.7″ / 40 cm and 23.6″ / 60 cm without assigning separate width, depth or height measurements. Refer to the dimension image at the bottom of this description for the full dimensional layout.
Technical Details
Product specifications
Product Type Outdoor Wall Lamp
Design Style Modern / Minimalist
Material Resin — Fixture and Shade
Light Source LED
Number of Light Sources 1
Power 6W–10W
Colour Temperature Warm Light
Dimmable No
Voltage 90–240V
Available Sizes 15.7″ / 40 cm and 23.6″ / 60 cm
Waterproof Rating IP65
Mounting Hardwired
Assembly Required
Environment Outdoor Use
Lighting Character
Warm illumination within a restrained exterior form
The single LED light source produces warm illumination, creating a softer exterior atmosphere around entrances, patios, pathways and porches.
The fixture is non-dimmable and operates within a specified power range of 6W–10W.
Exterior Placement
Designed for pathways, entrances and contemporary outdoor living
Entrances & Porches The slim rectangular form can be positioned beside doorways where a modern architectural light is preferred over a decorative lantern.
Patios Warm illumination provides an inviting lighting effect for exterior entertaining and seating areas.
Pathways Repeating the fixture along exterior walls can create a consistent contemporary rhythm through circulation areas.
Outdoor Performance
IP65-rated resin construction for exterior use
Edge carries an IP65 waterproof rating and is described as weather resistant, supporting use across exterior environments exposed to rain, heat and seasonal changes.
Resin is used for both the fixture and shade, maintaining a consistent material construction throughout the design.
Installation
Hardwired wall mounting for a clean architectural finish
The Edge Outdoor Wall Lamp is designed for hardwired exterior installation and requires assembly before final mounting.
Professional installation recommended. Electrical installation should be completed by a suitably qualified electrician and in accordance with applicable local electrical requirements.
For outdoor installation, the mounting and electrical connection should be completed appropriately for the fixture's IP65 rating and intended location.
Care
Maintaining the resin surfaces
Switch off power before cleaning. Remove dust and exterior residue using a soft cloth, taking care not to scratch or abrade the resin surface.
Avoid abrasive pads and harsh chemical cleaners that may affect the appearance of the fixture or shade.
Dimension Reference
Available wall light dimensions
Refer to the dimension image below to compare the 15.7″ / 40 cm and 23.6″ / 60 cm configurations and confirm the proportions best suited to your installation.
