Pillar Lighting
A glowing lattice cube for posts, walls and terraces
A dark grey metal cube is cut with an Art Deco grid of rectangular openings in this pillar light, so warm light glows through the lattice from an inner acrylic diffuser. The crisp geometry suits gate pillars, fence posts, garden walls, terraces and courtyards, and creates a patterned glow that looks equally good on a single post or repeated along a boundary.
The light is made from metal and acrylic with a weather-resistant surface, uses warm white 3000K LED (SMD) light sources and is rated IP65. Four sizes are offered, 20, 25, 30 and 40 cm (7.8″, 9.8″, 11.8″ and 15.7″), weighing about 1, 1.5, 2 and 2.5 kg. Each size comes in a hardwired version for 110–240V mains or a solar version.
01Lattice PatternGrid openings cast a patterned glow
02IP65 RatedDust and water protected
03Four SizesFrom 20 cm up to 40 cm
04Two Power OptionsHardwired mains or solar
Design & Material
Grid geometry with a soft inner glow
Art Deco Grid
The cube is cut with rows of rectangular openings, giving it a structured, architectural look that suits modern and classic homes alike.
Acrylic Diffuser
An acrylic inner panel softens the LED light, so the glow through the lattice is even and warm rather than spotty.
Dimensions
Four cube sizes
Each size is listed by its cube dimension. Measure the top of your pillar or post and choose a size that sits within it with a little margin.
| Variant |
Imperial |
Metric |
| 20 cm |
L 7.9″ |
L 20 cm |
| 25 cm |
L 9.8″ |
L 25 cm |
| 30 cm |
L 11.8″ |
L 30 cm |
| 40 cm |
L 15.7″ |
L 40 cm |
Technical Details
Product Specifications
Product TypeOutdoor pillar light
MaterialMetal, acrylic
ColourDark Grey
Light SourceLED (SMD), included
Colour Temperature3000K warm white
Voltage110–240V (hardwired version)
Power SourceHardwired or Solar
IP RatingIP65
Weight1 kg / 1.5 kg / 2 kg / 2.5 kg by size
AssemblyRequired
Warranty2 years
Power Source Options
Choose Your Power Source
Option 01Hardwired
Connects to the 110–240V mains supply for reliable, switch-controlled light every night.
Option 02Solar
Charges from sunlight with no cabling; the maker does not publish its panel, battery or run time details.
Lighting Character
Patterned warm light
Warm 3000K light passes through the acrylic and out through the grid, casting a soft pattern onto the pillar top and nearby surfaces. It is decorative accent lighting that marks posts and boundaries rather than a floodlight.
Placement
Where it works best
Place it on a flat, solid surface such as a pillar cap, post top or wall.
Gate PillarsA pair frames the driveway or gate.
Garden WallRepeat along a low wall for rhythm.
TerraceA glowing accent beside outdoor seating.
Outdoor Performance
IP65 for exposed positions
The IP65 rating protects the light against dust and water jets from any direction, so it suits exposed pillars, walls and terraces. Make sure water can drain away from the base, and for the solar version choose a spot with good daily sun.
Installation
Hardwired or solar installation
Assembly is required. The hardwired version connects to the mains supply and should be installed by a licensed electrician. The solar version needs no cabling; place it where the panel receives direct sunlight.
Professional installation recommended. Electrical installation should be completed by a suitably qualified electrician and in accordance with applicable local electrical requirements.
Warranty
Two-Year Warranty
This pillar light is supplied with a 2-year warranty, so you can choose it with confidence for everyday use.
Care
Keep the Surfaces Clean
Switch the light off before cleaning. Wipe the metal and acrylic with a soft, damp cloth and keep the solar panel free of dust and leaves. Avoid abrasive pads and harsh chemical cleaners.
Dimension Reference
Lattice cube size reference